Cummins Insite ECM Connection GuideAuto,RP1210 & Simulator

Cummins Insite ECM Connection GuideAuto,RP1210 & Simulator

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3



Here is a instruction on how to build connection between Cummins Insite and ECM:Auto Configure,RP1210 Adapter and Simulator.

Preparations:

Cummins Insite 8.6 Download (100% work)

Newest Cummins Insite 8.6 8.4 Free Download

How to Setup Cummins Insite 8.2.0 work with Nexiq usb link

Adding New Connection:

Click on connection

Select “Add New…”

Dialog box for ECM Connection Wizard should appear as shown.





Select appropriate connection

Auto Configure

Automatically detects installed datalink adapters

RP1210 Adapters

Manually configure the datalink adapter connection

Simulator

Creates simulated ECM

environment using virtual port

Click “Next” to continue.



Auto Configure

Auto Configure will automatically detect and connect to an RP1210A compliant adapter that is installed on the PC

Select Auto Configure and click the Next button

Ensure that the steps listed in the Instructions have been completed

Click the Start button



Auto Configure will attempt to detect and connect to an RP1210A compliant adapter

This can take several minutes to complete

To cancel the process, click the Stop button, otherwise let it run until it completes



Auto Configure process was successful

Click on the Next button to continue

Select the desired adapter configuration

Click on the Next button to continue



RP1210 Adapters

Select desired vendor

Select desired adapterEnsure correct connection type is selected (such as USB, Bluetooth, Wireless, or COM port)

Select protocolAuto Detect, J1939 or J1708

If desired, you may click “Datalink Adapter Connection Test” to validate driver installation

Once successful, click on “Next” to continue



Simulator

Simulates connections to all supported engines

Almost full simulated tool functionality

Can be used for training or exploring Engine Features without being connected to an Engine

Data is simulated and does not represent actual engine data

Classic simulator options available for pre-EPA 2007 engines

Integrated simulator options available for EPA 2007 and newer engines.

INSITE Integrated Simulator

–Multi ModuleSimulates multi-module set up

INSITE Integrated Simulator

–Single ModuleS imulates single module set up



Adding New Connection

Enter a desired name for the new connection.

Click “Next” to continue.



If desired, select corresponding checkbox to make connection active.

If desired, select corresponding checkbox to setup/add another connection.

Click “Finish”

NOTE:If another connection is not being created and connection is made active, the Connect to ECM dialog box will appear after finish.



Additional connections or simulators can be added by navigating the Menu BarTools >Options >Connections

File > Connections >Add New Connection…



Selecting Connections

Select connection from dropdown.

Connect dialog box should appear after selecting desired connection.



Connecting to ECM

Use the left View Bar “Connect to ECM” icon

Click on Tool Bar icon

From Menu Bar, click on Tools Connect to ECM

Use keyboard key shortcut Ctrl+E

IMPORTANT NOTE: Always ensure the desired adapter is selected before attempting to connect to the ECM



Clicking “Connect” button will start establishing data link connection to ECM.



This article tech Supported by China OBD2,