BMW E Series ABS DSC Module 5EAC Trouble Repair

BMW E Series ABS DSC Module 5EAC Trouble Repair

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3



Here is a real repair case on how to repair BMW E series ABS system DSC control module 5EAC trouble code.More BMW repair case please refer to:BMW Trouble Repair.

Symptoms:

ABS warning light on and ABS system can not work

Trouble Code:

5EAC–DSG speed sensor right front



Possible reasons:

1.DSC right front speed sensor installed incorrectly

2.DSC right front speed sensor damaged or contaminated

3.DSC right front speed sensor connector or harness damaged

4.Right front tire wheel bearing damaged

5.DSC module error

Diagnostics:

Measure from pin 1 of sensor to pin 16 of DSC module (work well)

Measure from pin 2 of sensor to pin 15 of DSC module (work well)

Measure resistance from pin 15 to pin 16 of DSC module,it show gigantic (71-78Ω normally)



Remove the cover DSC PCB to check,and then weld the damaged solder joint,after all done.

Install back on vehicle to test,all thing work well！！！

This article tech Supported by China OBD2,