Honda Actuation Test -Fuel Pump off by Launch X431

Honda Actuation Test -Fuel Pump off by Launch X431

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3



It is very necessary to release the fuel pressure before open any fuel hose and parts.So here i write this instruction on how to make fuel pump off before fuel replacement by Launch X431.More Launch X431 Training article,please check here:Launch X431 user guide

Procedures:

Connect Launch X431 to Honda vehicle.

First step,check and make sure no trouble code otherwise the actuation test will unsuccessful.

Then select [Actuation Test]

Select [Fuel Pump Off],this function manually stop the fuel pump.

Start the engine

Please ensure the gear shift is in Neutral

Parking Brake is Applied

Do not press the throttle pedal

The condition of stop the fuel pump:Engine speed <1000rpm p="">



We just wait for engine speed droop


The fuel pressure has been relieved


Turn the ignition switch off



And please not:the fuel pressure will be restored if the ignition is switch on.


Now you can disconnect Launch X431 to start fuel replacement work


Open the fuel hose with minimum leak




Install all parts back on your vehicle,turn ignition on and start.


All back to normal.



This article tech Supported by China OBD2,