Launch X431 Reset Audi A6L Service Lamp and Service Interval Set

Launch X431 Reset Audi A6L Service Lamp and Service Interval Set

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3



This mini post show the operation of how to use Launch X431 to reset service lamp and service interval set for Audi A6L.

And here is a collection of Audi A6 Trouble Repair.

Service Lamp Reset procedure:

1.Connect X-431, select [CAN BUS II DIAGNOSTIC CONNECTOR] connector;

2.Ignition ON;

3.Select Audi maker;

4.Select CAN bus system;

5.Access 17 Instrument cluster;；

6.Select 10 Adaptation，enter 02 channel, click OK;

7.Click “-”button to change the adaptation value into “0”, click OK；

8.Exit to end the reset.

Set Interval procedure:

1.Connect X-431, select [CAN BUS II DIAGNOSTIC CONNECTOR] connector;

2.Ignition ON;

3.Select Audi maker;

4.Select CAN bus system;

5.Access 17 Instrument cluster；

6.Select 10 Adaptation，enter 40 channel, click OK;

7.Select “->” to enter the mileage interval for next service（e.g.: input 100 for 5000km，

100=（15000-5000）/100），click OK;

8.Exit to end the set.

Note: Before change the interval mileage, please verify that the adaptation value in each channel Number: Channel “41” is “0”,channel “42” is “150”, channel “43” is “150” and channel “44” is“365”, otherwise, please modify it as above procedure.

This article tech Supported by China OBD2,