How to Install VCP System Diagnostic Tool Software

How to Install VCP System Diagnostic Tool Software

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3



This article i want to share the guide on how to install VCP System professional diagnostic tool software.Hope it helps!

Preparation:

VCP System Professional Diagnostic Tool Software Download

Basic Installation:

Extract the setup.exe file out of the downloaded ZIP archive.

Define the Application location. We recommend to create the folder directly in the local drive: For example: C:\VCP8

Microsoft Visual C++ Confirm the Installation steps for Visual C++ Components

Driver Installation

The Driver Setup of the new Interface Generation v2.0 consists of

2 components:

VCP Interface Dongle, HID Global SmartCard Reader

Confirm every step of the Driver Setup procedure.

Driver Setup of the new Interface Generation v2.0 Confirm the following steps.

Driver Setup for the integrated HID SmartCard Reader

Confirm each step of the Driver Setup procedure for the integrated SmartCard Reader.

Basic Installation Successfully Completed

Press NEXT and then FINISH to close the dialogue box. The ACTIVATOR will open afterwards.

Device Driver Installation

In the Driver dialogue box you can monitor whether the installed drivers were correctly assigned (no driver will be assigned to the SmartCard; this will be first possible in Windows 8 (the Smart Card will also be correctly displayed)).

If you encounter any problems at this stage, we suggest to try and connect the Interface to a different USB port. The assignment of the driver may take up to 5 minutes depending on the hardware configuration.

You can now start using the new VCP Activator version v6.

Interface and Smart Card drivers installed successfully

This article tech Supported by China OBD2,