Volvo Premium Tech Tool Change Parameter P1AO5

Volvo Premium Tech Tool Change Parameter P1AO5

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3



This article show a guide on how to use Volvo Premium Tech Tool to change Parameter P1AO5 (PTO 1 Split Gear) for lock out of neutral 2 in PTO mode.

Preparations:

Volvo PTT Premium Tech Tool PTT 2.6.0.29 All Version Free Download

How to Install Volvo Premium Tech Tool PTT Software

Procedures:

Run Volvo PTT Premium Tech Tool,and login

Select “Connect”

Enter work order number and click “Start Work”

Select “Program”

Then click “1700-22-03 Parameter,programming”

Click “Start” to continue

Please read and “check” the box to agree to the advisory.Click “Continue” to proceed

Then click “Continue”

After meeting automatically checked conditions.Click “Continue”

Allow time for readout of parameters

Then select TECU control unit view

Locate P1AO5(Spill gear for Transmission PTO 1).

Double click the value of parameter P1AO5 and change it to 1.After changing the value of this parameter click somewhere else on the screen then click continue to process.

Before program the value to vehicle,you need click “Program” button to start.

Now you will see the new value you have program it,and click “Exit” to process

Now you will be prompt to follow bellow operation to restart control modules

1.Ignition key in OFF position

2.Wait 10 seconds

3.Ignition key in ON position

Now the parameter P1AO5 has been changed to 1 to lock out N2 during TO operation.

Important:

After working in any diagnose,test,calibration or program operation click on “Finish work” before you work in another vehicle.

Done!

This article tech Supported by China OBD2,