Zed-Full All Keys Lost Programming for Ford Transit 2017+ by OBD

Zed-Full All Keys Lost Programming for Ford Transit 2017+ by OBD

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3



In this instruction,car-auto-repair.com will show you the procedures on how to use Zed-Full to program new keys for Ford Transit 2017+.And if you want to get more ford key programming,please check here:Ford key Programming.

Procedures:

Connect Zed-Full to Ford Transit OBD port

Select “OBD Application”

Select “Ford EU”–>”Transit” and press “Continue”

Select “Transit 17+”,then click “Continue”.The transponder type is HITAG PRO

Select “Add key”,if you are willing to add key only

Here we need to “Delete keys”

All previously programmed keys will be deleted.Before starting,make sure you have all keys you aw want to program.At least 2 keys must be coded.Turn ignition On with the key to be programmed,then press “Continue”

Connection is successful.VIN number and BCM part number is as shown on screen,the click “Continue” button

Now Zed-Full Programmer will take about 5-6 minute to reading eeprom,please wait

Turn ignition off and ON,then press “Continue” button

All keys are deleted successfully

Turn ignition ON with the new key to be programmed,the press “Continue”

Key programming complete,if you want to add another key press “Continue”

Just repeat to program another key.

Done!

This article tech Supported by China OBD2,