How to Install BMW INPA Software on Win XP /Win 7/ Win 8/Win 10

How to Install BMW INPA Software on Win XP /Win 7/ Win 8/Win 10

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3



One of my blog readers sent the e-mail to ask how to install BMW INPA software on win7/win 8/win10.I searched and found the solution provided by forum members.



Some BMW INPA  Source You Need:

BMW INPA 6.4.3 Software Free Download

How To Install BMW Ediabas/INPA On Win XP/Vista

BMW Standard Tools 2.12 Free Download

SP Daten50.2 download here

https://mega.nz/#F!nshRWaLA!NbXQSw7903FIt0JdU81zCA

BMW INPA Win XP Pro Installation:

Step 1 – Prepare the laptop

First, you have to make a tiny change to the Windows environment variables. This is less scary than it sounds. INPA relies on a file called API.DLL being in a folder that is set in the Windows “path” so you need to add the EDIABAS folder to the path variable, like this:

1. Go to control panel, select Classic View and open the “System” item



2. Choose “Advanced” and then “Environment Variables”



3. You’ll see a system variable called “Path” – double-click this

4. In the “Variable value:” box, add “;c:\ediabas\bin” to the end of the list of folders – e.g:

%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;c:\ediabas\bin



5. OK OK OK until the system window and control panel are gone

6. Reboot (important so that Windows picks up the change to the path)

Step 2 – Install the software

The installation is pretty intuitive. I had some problems trying to install the entire suite of programs, but was successful when I kept the install to INPA and EDIABAS. These two allow me to do what I want to the car so I don’t need the others. I also had some problems

installing from hard disk (rather than CD) but only on one laptop, not the other.

1. Unzip the package, either onto laptop directly or onto CD (I used CD so I could move it on to my old XP laptop easily)

2. Run the Instprog.exe program from the \INSTALL\ folder

3. OK the warning message:



4. Choose English and click continue



5. Select the drive to install to and click continue



6. Select configuration “BMW Group Rectification programs UK” and click continue (this selection makes INPA run in English which is kind of useful!)



7. Select “complete” for EDIABAS and INPA and click continue (ignore WINELDI / NCS /NFS)



8. Select the interface cable type (the ones on eBay are “OBD” cables)



9. Confirm that you want to start the install (if you’ve previously tried and failed to install, it might ask you whether to delete or rename the existing install – choose Delete)



10. You should get an “installation finished” message



11. If you didn’t do the “path” setup I described in step 1, you will get another message. You HAVE to do Step 1 for it to work.



If you try to run it now, it still won’t work because of some duff registry settings. You need one final step to get it sorted!

12. Once the install is finished, there will be a folder on your laptop called c:\ediabas\hardware\obd and inside it will be a program called OBDSetup.exe – you need to run this. You can just search for OBDSetup.exe using Windows search.



You will see this screen when you run it:

BMW INPA Win7 Installation Guide:

Method 1 BMW INPA work on Win7 32 bit

Method 2 work on Win7 64 bit

This method share by sergeantash on bimmerforums.co.uk forum

I have been trying to find clear instructions on how to achieve this installation successfully over the past few months, I kept giving up due to confusion, frustration, misleading threads and bad information. However, after much research, I have finally got it working and hope to help others searching for solutions. I can’t guarantee that this is absolutely perfectly described but the process below worked in my case, hopefully it’ll get you up and running too.

My specific use is to diagnose codes on my E46 M3 (2004) and so I can confirm that it works fully with this car. If someone wishes to take screenshots, I’ll add them to the guide.

Assumptions and Clarifications

This setup/installation DOES work on Windows 7 64bit.

This setup/installation DOES NOT require VM/Virtual Machine images.

This setup/installation DOES work on an E46 (my car).

This setup/installation DOES give you INPA and EDIABAS 6.4.7 and 5.0.2.

This setup/installation DOES NOT give you NCS Expert or anything other than above mentioned.

This guide assumes that you have a basic knowledge of Windows, Control Panel and Device Manager.

1. Buy a cable

I purchased a USB cable from EBay, it came with software but I didn’t use it and instead used online resources that I downloaded for which I’ll provide links. The cable I purchased is a USB to OBD2 connector that plugs into your BMW to the right hand side of the steering wheel, in the foot-well area.

This is the specific cable that I purchased and that I can confirm works:

BMW Diagnostic Software Cable lead Ediabas Inpa

2. Download the software

There are many sources on the internet for INPA/EDIABAS, some seem to work, others do not – I used these specific downloads and they worked perfectly:

** UNFORTUNATELY THE DOWNLOAD LINKS ARE NO LONGER AVAILABLE – BUT I WILL SEE WHAT I CAN DO **

If for any reason the above links are missing/broken, PM me and I’ll see what I can do. Thank you to whomever is hosting the above files and I hope that you do not mind me providing these links.

3. Setup/Configure your OBD2 USB Cable

Put the DVD that arrived with the cable into the DVD drive on your PC.

Plug in the cable into a USB port on your computer, you must ONLY use this USB port from here-on for this cable. If your computer is connected to the internet it should automatically search and install in the USB cable drivers. If your computer does NOT automatically detect the cable, you may need to use ‘Device Manager’ to manually update/select the driver.

Once installed, go to Control Panel -> System -> Then click on the Hardware tab, then click on Device Manager.

Locate the entry ‘USB Serial Port’ in the ‘Ports’ section of Device Manager. It should read ‘USB Serial Port (COMX)’.

Right-click on the above and select ‘Properties’, then click on the ‘Port Settings’ Tab and then click on ‘Advanced’.

Change the ‘Com Port Number’ entry to ‘COM1’.

Change the ‘Latency Timer (msec)’ to ‘1’.

Click on ‘OK’ and close all the windows, restart your PC to confirm all the changes.

4. Install INPA/EDIABAS 6.4.3 and 4.4.7

Extract the contents of the downloaded file ‘INPA-6.4.3-full.rar’ and you’ll find a .NRG file. This is a CD image that you’ll need to either burn to a CD or extract to a folder using a tool such as ISOBuster.

Once extracted, go into the following folder ‘/REFERENZ/INSTALL/’, right-click on ‘INSTPROG.exe’ and select ‘Properties’, click on the Compatibility tab and change the dropdown to Windows XP SP3 as the Compatibility Mode, also tick ‘Run As Administrator’, then click ‘Ok’, then double-click the file to run the installation.

Select ‘English’ as the language and click ‘Next’.

Select ‘Next’ until asked for ‘Configuration’, scroll to ‘BMW Group Rectification Programs UK’, click ‘Next’.

Tick the option ‘Complete’ for all of the options shown.

Select ‘Next’ and allow the installation to start.

After a minute or so, installation will complete, close the Window.

5. Verify environment variables

Go into Control Panel -> System -> Advanced System Settings.

Select ‘Environment Variables’ and then verify that the System Variables ‘TMP’ and ‘TEMP’ both contain the path ‘C:\EDIABAS\Bin’ within the ‘Value’ string – for instance “C:\Windows\Temp;C:\EDIABAS\Bin”.

6. Prepare Installation Files

Extract the contents of the downloaded file ‘INPA_502_Updated.rar’.

You’ll use the contents of this archive during the next three steps.

7. Install BMW Tools

From the above extracted file set, find the file ‘Step 1_ Install BMW Tools.exe’, right-click on it and select ‘Properties’.

Click on the Compatibility tab and change the dropdown to Windows XP SP3 as the Compatibility Mode, also tick ‘Run As Administrator’, then click ‘Ok’

Double-click on the above file to start the installation.

Set the Destination Path C:\BMW Tools (Don’t change this path) -> ‘Install’ -> ‘OK’.

Select ‘English’ -> ‘Continue’ -> ‘Continue’.

Select ‘C:’ -> ‘Continue’.

Select ‘Skip’ -> ‘Next’

Accept the defaults for programs to update, then click ‘Next’.

Select ‘Com1’, ‘OBD’ and ‘USB to Serial Adapter’ -> ‘Continue’ -> ‘Continue’.

The installation will begin and complete.

8. Install INPA/EDIABAS 6.4.7 and 5.0.2

From the above extracted file set, double-click the file ‘Step 2_ Install INPA.exe’.

The Destination Path should be ‘C:\temp’, leave as it is and click ‘Next’.

Choose ‘English’ and select ‘Continue’ and ‘Continue’.

Select ‘C:\’ and then ‘Continue’.

Select ‘BMW Group Rectification Programs UK’ and click ‘Continue’.

Tick ‘Update’ for all options where not grayed out, then ‘Continue’.

Select ‘OBD’, then ‘Continue’ and ‘Continue’.

The installation will begin and complete.

9. Install OBD Setup

From the above extracted file set, double-click the file ‘Step 3_Final Update.exe’.

The Destination Path should be left as it is, then select ‘Install’.

Select ‘Yes to all’.

Once completed, the window will close itself.

10. Complete Installation

From the above extracted file set, double-click the file ‘serial port.reg’.

When prompted, select ‘Yes’ and ‘Yes’. You will receive confirmation that your registry has been updated.

Locate the file ‘C:\EDIABAS\Bin\obd.ini’ and copy this file into your Windows folder.

Edit the file ‘C:\EC-APPS\INPA\CFGDAT\INPA.INI’ in Notepad, locate the section that starts with ‘//F3’, remove the slashes at the beginning of the three lines of text, and amend any instance of ‘F10’ to ‘E46’.

In theory, you’ll now have an INPA icon on your desktop and Start Menu – right-click on it, select ‘Troubleshoot Compatibility’, it’ll select ‘Windows XP SP3’, click ‘Next’ and ‘Save’. This step isn’t necessarily required, however it apparently provides a little more stability for the application.

Now, with your interface connected via the USB port (remember NOT to plug the cable into any port other than the port that you originally configured the cable with) – and the other end connected to your car, fire up INPA and hopefully you’ll have a working diagnosis tool

Apologies for any inaccuracies, please do PM me and I’ll make corrections, but to my knowledge the above is the exact process that I used to get mine up and running.

Finally, I’d like to thank FAL for his help/assistance with getting my setup fully working

Procedures of BMW INPA Install on WIN10:

Method 1:

INPA/EDIABAS Windows 10 64-bit Installation Guide

share by perishalive92 from bimmerforums.com

NOTE: I am NOT responsible for any damage YOU do to your car or computer. INPA will work with few select things for an E38 such as restting adaptations, diagnostics, code reading, etc. NCS Expert will NOT run on a 64-bit operating syetm. If you have a 32-bit version of Windows 10, please feel free to try ECS Expert and let me know if it works!

I have NOT tried INPA with any other bmw models. Please feel free to comment your success on other models!!

Should you get ANY errors or pop-ups during any phase of the installation, ignore them. INPA will still install.

Pre-Installation

1.Download all required files and programs,as listed below. Also you should have the K+DCAN cable in your posession(link provided below).

2.Extract the INPA.rar to your desktop. You will be left with INPA folder.

3.Extract INPAcable.rar to your desktop. You will be left with INPA cable folder.

Installation – Phase 1

1.Open INPA cable folder and move the top four folders (step1, step2, step3 and driver) to Windows(C folder of your PC.

2.Whilst in Windows(C, open 01_Step1 folder and copy EC-APPS over to your Windows(C drive.

3.Go back to 01_Step1 folder and open the NFS folder. Open Entpackt folder. Open disk 1, find SETUP.exe and right-click it. Goto Properties/Compatibility and set it to run in compatibilty mode for Windows XP (Service Pack 3). Also, check the box for Run as Administrator. Hit Apply then Ok.

4.Double-click SETUP.exe to launch.

5. Once window pops up, select Windows XP. Click Weiter (it means Next).

6.Click Weiter 3 more times. Make sure User Mode is selected. Click weiter.

7.Make sure top choice is selected (1 Parametri……). Click Weiter.

8.Ensure OBD is selected. Press weiter. Ensure Kein API-TRACE. Click weiter. Ensure Kein IFH-TRACE is selected. Click weiter.Ensure Komfort(.IPO) is selected. Press weiter.

9.Press OK. Let install. Press ok, and again. Press any key to continue.

10.Select Ja,Computer jetzt neu starten. Click Breeden. This will restart your PC as needed.

Phase 2

1.Goto Windows(C/02_Step_2/INSTALL and right click on Instprog. Set it up to run in compatibility mode as mentioned in Phase1, step 3. Then double-click to launch.

2.Press OK if prompted. Select Enlgish then press weiter.

3.Press continue and continue again. Ensure destination is under C:

4. Press continue. Select BMW Group Rectification programs UK. (NOT USA) Press continue.

5.Check off all white boxs. There will be 2 update and 1 complete that needs to be checked. Press continue, and again. You may get error. ignore it. Otherwise, press End.

6.Restart your PC once more manually.

Phase 3

1.Goto Windows(C/03_Step_3/INSTALL and right click on Instprog. Set it up to run in compatibility mode as mentioned in Phase1, step 3. Then double-click to launch.

2.Press OK if prompted. Select Enlgish then press weiter.

3.Press continue and continue again. Ensure destination is under C:

4. Press continue. Select BMW Group Rectification programs UK. (NOT USA) Press continue.

5.Under INPA 5.0.1, check off Update. Under NCS Expert 3.0.8, check off Complete. Press continue.

6.Click on Rename. In the box, type the number 1 and press continue, and again. You might gett error. Ignore it. IF prompted, press End.

Phase 4

1.Plug in your K+DCAN cable. You will from now on use ONLY that port.

**Windows 10 will autoatically update the driver IF needed. Windows 10 also already has a serial function. This is all we need to modify.**

2.In your search box (lower left of screen next to Windows button), type “Device Manager”. Click on the top option.

3.Once in Device Manager, locate Ports(COM & LPT) and click on the little plus sign next to it. It should now show USB Serial Port (COMx) under Ports(COM & LPT). **The little ‘x’ is in place of whatever number you have the cable plugged into).

4.Right-click on USB Serial Port (COMx) and click Properties.

5.Goto Port Settings tab. Click Advanced. Change the COM Port Number to COM1.

6.Change Latency Timer from 16 to 1. Press ok. Press ok again. Close Device Manager.

7.Goto Windows(C/Driver_D_CAN_USB and double-click OBDSetup.exe. Press Enter.

Phase 5

1.Go into Control Panel/System/Advanced System Settings/Environment Variables.

2.Ensure that System Variables TMP and TEMP both contain the path C:\EDIABAS\Bin.

3.If not, manually add it in. Example: C:\Windows\Temp;C:\EDIABAS\Bin

4.the ‘;’ is important to seperate paths. Please ensure you put that in there then add in the rest.

Phase 6

1.From Desktop, open INPA folder then open the second INPA folder. Right click on Step_1_Install_BMW_Tools and click Poperties. Goto Compatibilty and run the program in compatibility mode for Windows 7. Also, run as administrator. Click Apply then ok. Doulbe-click to launch.

2.Enusre destination path is C:\BMW Tools , if it is not change it to that.

3.Press Install. You will get an error. Press ok.

4.Goto Windows(C/BMW Tools/Programminstallation and right-click on setup.exe. Set it up for compatibility mode as stated in Phase 1, step 3.

5.double-click to launch. Select English, press ok. Press Next. Accept and press next. Press next again and again.Ensure the installation destination is C:\EDIABAS, click next.Ensure installation destination is C:\EC-APPS\NFS,click next.Ensure installation destination is C:\EC-APPS\INPA, click next.Ensure installation destination is C:\NCSEXPER, click next.Ensure start menu folder is BMW Standard Tools. click next.

6.You do NOT have to perform the data backup if not desired. I didn’t. Uncheck box if not wanting data backup and click next.Ensure hardware-interface setting is STD:OBD and click next.Ensure COM port for serial OBD is Com1. Check the box for USB to serial adapter. click next. Click Install. If any errors, ignore them.

Phase 7

1.Goto Desktop/INPA/INPA and right-click the file ‘Step 2_ Install INPA.exe’.Set up for compatibility as mentioned in Phase 6,step 1.

2.The Destination Path should be ‘C:\temp’, leave as it is and click ‘Next’.

3.Choose ‘English’ and select ‘Continue’ and ‘Continue’.

4.Select ‘C:\’ and then ‘Continue’.

5.Select ‘BMW Group Rectification Programs UK’ and click ‘Continue’.

6.Tick ‘Update’ for all options where not grayed out, then ‘Continue’.

7.Select ‘OBD’, then ‘Continue’ and ‘Continue’.

8.The installation will begin and complete.

Phase 8

1.Goto Desktop/INPA/INPA and right-click the file ‘Step 3_ Final Update.exe’.Set up for compatibility as mentioned in Phase 6,step 1.

2.The Destination Path should be left as it is, then select ‘Install’.

3.Select ‘Yes to all’.

4.Once completed, the window will close itself.

Phase 9

1.Goto Desktop/INPA/INPA and double-click the file ‘serial port.reg’.

2.When prompted, select ‘Yes’ and ‘Yes’. You will receive confirmation that your registry has been updated.

3.Locate the file ‘C:\EDIABAS\Bin\obd.ini’ and copy this file into your Windows folder.

4.Edit the file ‘C:\EC-APPS\INPA\CFGDAT\INPA.INI’ in Notepad, locate the section that starts with ‘//F3’, remove the slashes at the beginning of the three lines of text, and amend any instance of ‘F10’ to ‘E46’.

**Step 4 is only needed if you are working on an E46. Otherwise, ignore this step!

In theory, you will not have INPA on your desktop. Right-click it and set up compatibility mode as mentioned in Phase 1, step 3. Double click to launch.

Method 2:

Install the drivers for INPA K+D-CAN cable (version with FTDI FT232RL chip only).

Disconnect from the Internet because it is possible that the drivers are installed from Windows Update (if you want to use the latest home FTDICHIP then disconnect or reinstall) why run the executable CDM 21216_setup.exe; It is compatible with 64-bit versions of Windows 7, If necessary, you can download the latest version according to the OS on the siteFTDICHIP

http://www.ftdichip.com/Drivers/VCP.htm

This is an interface / cable VCP (Virtual COM Port) so there are two features and therefore an installation in 2 phases if done manually

1 – Cable driver

2 – VCP driver if using the automatic executable (.exe) offered on the site, then the 2 self install a result it’s easier and without going through the Device Manager => then plug the INPA cable into a USB port NOTE WELL PORT IDENTIFY THIS CAR ALONE WILL WORK AFTER SETTING IT WILL THEREFORE ALWAYS CONNECT THE CABLE ON THE PORT in Device Manager there will be a new entry: “COM and LPT ports” / sérial USB Port (COM3) eg for now Then you must configure the port that will emulate the virtual COM port 9 (eg. Default for Ediabas 7.3 patched) but it’s tune to your install Open Device Manager, choose COM Ports / USB serial port / port settings / advanced / set “COM 9” and the latency to “1” finally install BMW Standard Tools, all versions are not compatible with win 7 and 64-bit architectures, so use the BMW STD Tools version 2.12, which includes a recent version INPA 5.0.6 and 7.3.0 Ediabas.

This article tech Supported by China OBD2,



http://vcds.topbloghub.com/profile

http://vcds.mdkblog.com/profile

http://vcds.theideasblog.com/profile