Monday, April 27, 2020

How to Enhance Jeep Renegade/Fiat 500X RA4 RG4 Radio Performance

How to Enhance Jeep Renegade/Fiat 500X RA4 RG4 Radio Performance

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

chinaobd2

For Jeep Renegade or Fiat 500X vehicle owner,you may be experience on or more of the following,this article will show you how to solve this problem.

  • Poor quality of German translations.
  • Acoustic warning missing when approaching a speed camera. (EMEA market only)
  • 3D view malfunctions.
  • Road signs not correctly viewed during navigation.
  • After ignition has been turned on the language switches automatically to Italian frompreviously selected language.
  • Forward Collision Warning with mitigation (FCW+) turns off spontaneously after theignition has been turned on and FCW+ warning light is on.
MODELS:

2015 – 2016   (BU)   Jeep Renegade

2016               (FB)    Fiat 500X

Note:

THE wiTECH SOFTWARE IS REQUIRED TO BE AT THE LATEST RELEASE BEFORE PERFORMING THIS PROCEDURE.

This instruction applies to vehicles within the following markets/countries: NAFTA and EMEA.

This instruction applies to vehicles built on or before February 22, 2016 (MDH 0222XX) equipped with one of the following radios:

  • Uconnect 6.5NAV Radio (Sales Code RA4).
  • Uconnect 6.5NAV Radio (Sales Code RG4).
DIAGNOSIS:

Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in TechCONNECT, verify is any Diagnostic Trouble Codes (DTCs) are set. If DTCs or symptom conditions, other than the ones listed above are present, record the issues on the repair order and repair as necessary before proceeding further with this instruction.

If the customer describes the symptom/condition listed, perform the Repair Procedure.

REPAIR PROCEDURE:

1.Has the USB flash drive been created?

a.YES >>> Proceed to Step #5.

b.NO >>> Proceed to Step #2.

2.Go to DealerCONNECT> Service> UCONNECT Information & Utilities> Uconnect Dealer software downloads to download the files.

3.If a security message appears “Do you want to view only the web page content that was delivered securely?” press ”NO” to continue.

NOTE: If you cannot download the software, make sure you have proper security access. If not, have the Service Manager or Shop Foreman download the software update.

4.To download the software files to a USB flash drive, follow the on screen instructions and perform the following:

a.Acquire a blank USB flash drive with at least 4 gb of space.

b.Download the software update file to your local pc’s desktop.

c.Be sure to extract the file before copying it to the blank USB flash drive.

d.A blank USB flash drive will be needed one for each radio update, additional updates can not be on the same USB flash drive.

e.Once the file is saved to the USB flash drive, it is recommended you label the USB flash drive with the instruction number and proper radio sales codes.

5.With the engine running and radio on, insert the correct USB flash drive with the new software into USB port.

6.The next screen display will have the old and new software levels. The radio will be updated to the latest release level.

7.Is the radio at software level at the latest release level?

a.YES >>> The radio software is already up to date. The instruction is now complete.

b.NO >>> The radio software needs to be updated. Proceed to Step #8.

8.Press the “Yes” button to start the update.

NOTE: If the software update process is interrupted, aborted or failed, the process should be restarted.

NOTE: Do not cycle the ignition or touch the radio during the update process.

9.The update may take up to 20 minutes to load. No other actions will be needed to initiate the update.

10.After the update is done, the screen will display the software levels again.

11.Press “No” and turn the vehicle off. Open and close the driver’s door and let the Bus go to sleep.

NOTE: Make sure to leave the ignition off, do not press the brake pedal, and do not open any doors, so the modules will go to sleep.

12.Cycle the ignition on, then back off one more time. Open and close the driver’s door and let the Bus go to sleep. This will complete the radio update.

13.Remove the USB flash drive, the instruction is now complete.

This article tech Supported by China OBD2,

No comments:

Post a Comment