CK300 Easy Check detect remote key frequency, key type & ID, voltage

CK300 Easy Check detect remote key frequency, key type & ID, voltage

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

CK360 Easy Check, the necessary for a locksmith, able to detect the remote control frequency, the key IMMO chip, Mercedes infrared key, intelligent signal, remote control button battery.

In this post:

1. Detection of button battery voltage and power charging fully or not.

2. Detection of remote control frequency 315 434 868 902Hz

3. Detection of MQA-A key type and ID & MQA-B key type and ID

Go one by one:
1.Detection of button battery voltage and power charging fully or not.
Button battery voltage

Put the first one button battery on the CK360 tester, read out the voltage 3.26V, with fully charged.

Change the 2nd button battery on the CK360 tester, voltage is 3.26V, with normal battery.

Change the third button battery on the CK360 tester, voltage is 0.45V, without battery capacity signal. That means this battery is bad and should be throw away.


2.Detection of remote frequency 315 434 868 902Hz


3.Detection of MQA-A key type and ID & MQA-B key type and ID


IMMO chip type: 49+
ID:C60A1E3F
MQB-B

Press “Back”, put another one remote key on CK360 Tester, press OK, detect out:
Key type: 48 unlocked.
ID: 0AB0E06A
MQB -A


Enjoy.


This article tech Supported by China OBD2,