Tuesday, July 7, 2020

VW RCD200/300/500 BLAUPUNKT Radio Decode by 2.5.8 pt geza

VW RCD200/300/500 BLAUPUNKT Radio Decode by 2.5.8 pt geza

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

chinaobd2

Sometime when your Volkswagen car radio replace battery or replace a used radio,you will find it will ask you to input password to unlock your car radio.In some situation,you forget the code,so here i will show you guide on how to unlock or decode Volkswagen RCD300 BLAUPUNKT Radio by 2.5.8 pt geza software.

VW-RCD200300500-BLAUPUNKT-Radio-Decode-by-2.5.8-pt-geza-1

Preparation:

2.5.8 pt geza Radio Unlocker

Procedures:

Remove cover and then locate 95640 chip on PCB

VW-RCD200300500-BLAUPUNKT-Radio-Decode-by-2.5.8-pt-geza-2 VW-RCD200300500-BLAUPUNKT-Radio-Decode-by-2.5.8-pt-geza-3

Then remove it and use programmer to read out the dump file and save it on our PC.

VW-RCD200300500-BLAUPUNKT-Radio-Decode-by-2.5.8-pt-geza-4

Run 2.5.8 pt geza software,then select “Blaupunkt RCD 200/300/500”

VW-RCD200300500-BLAUPUNKT-Radio-Decode-by-2.5.8-pt-geza-5

Click “Load dump bin file” button,then load the file you just saved on your PC

VW-RCD200300500-BLAUPUNKT-Radio-Decode-by-2.5.8-pt-geza-6 VW-RCD200300500-BLAUPUNKT-Radio-Decode-by-2.5.8-pt-geza-7

After then click “Get code” button

VW-RCD200300500-BLAUPUNKT-Radio-Decode-by-2.5.8-pt-geza-8

Now you can get the unlock code:0138

VW-RCD200300500-BLAUPUNKT-Radio-Decode-by-2.5.8-pt-geza-9

Install all parts back to RCD radio and power it,then input the code:0138

VW-RCD200300500-BLAUPUNKT-Radio-Decode-by-2.5.8-pt-geza-10

Now you will find it will be unlocked.

VW-RCD200300500-BLAUPUNKT-Radio-Decode-by-2.5.8-pt-geza-11

Done!

This article tech Supported by China OBD2,

1 comment: