2015-2017 Mercedes FBS4 Mileage Programming Solutions Cheap & Expensive

2015-2017 Mercedes FBS4 Mileage Programming Solutions Cheap & Expensive

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

2015-2017 Mercedes FBS4 mileage programming solutions:
1.Mercedes_OBD assistant cable (Newest, 269usd)
2.CG MB programmer newest version (adds Mercedes FBS4 mileage programming functions)
Part 1: Mercedes_OBD assistant cable

Price: 269usd
Method: via OBD

Car model list:
W222: 2015 -2017
W205: 2015-2017
C217: 2015-2017
C190: 2015-2017
C253: 2015-2017
X253: 2015-2017
W447: 2015-2017
W213: 2015-2017 (will update)
-2015: need can filter
Type 1: MB CAN Filter 18 in 1 for Benz BMW (20usd)
https://www.chinaobd2.com/wholesale/yanhua-mb-can-filter-18-in-1-4804.html

Type 2: CAN Filter 18 in 1 for Benz/BMW (20usd)
https://www.chinaobd2.com/wholesale/can-filter-18-in-1-for-benz-bmw.html

Procedure:
1. First use the <1 config="" info="" obd="" read=""> option to get the vehicle configuration information;
2. Reinstall the meter and write the vehicle configuration information with the <3 config="" info="" obd="" write=""> option;
3. Finally use the <4 mileage="" obd="" read=""> and <5 mileage="" obd="" write=""> options to read and write the kilometers.
4. Modifying the kilometers again is only required to operate in <4 mileage="" obd="" read=""> or <5 mileage="" obd="" write=""> steps!!!

Note:
<1 config="" info="" obd="" read=""> and <2 config="" info="" obd="" write=""> communication takes 15-30 minutes, Please make sure the vehicle battery is sufficient! Before operating <2 data="" mcu="" programming="">, Please confirm whether the meter is 8-drive or 11-drive.
Step 1: OBD Read Configuration Information;
If Odometer Correction is supported, here are the tips: Make sure the vehicle battery is sufficient.
If Odometer Correction is not supported, here are the tips: For cars before 15 years, you need to add a filter, and then you can operate steps 4(OBD read kilometers) and steps 5(OBD write kilometers); cars after 17 years do not support Odometer Correction temporarily.
An example: Benz 205 chassis instrument for 16 years calibration process
Step 1: OBD Read Configuration Information
Configuration data must be saved after successful reading!
Step 2: MCU Data Programming
At this time, you need to remove the back cover of the dashboard, select the type, and select the wiring method according to the type. You can open the wiring diagram directly,there are 5 wires in total(as the picture). The meter is divided into 8-drive and 11 drive.Please confirm whether the meter is 8-drive or 11-drive.

After connecting the wires according to the wiring diagram, perform the operation. If the MCU data is edited successfully, the wiring can be removed.
Step 3: OBD Write Configuration Information
The configuration information is the data read in the first step, and you can select the saved data at this time;
Then you can get the prompt that the vehicle configuration information is written successfully
Step 4: Adjust the mileage
Use the <4 mileage="" obd="" read=""> and <5 mileage="" obd="" write=""> options to read and write the kilometers.
For example, we wrote the mileage of 12345; then read it out is 12345km.
Look at the dashboard again, the kilometers are correct! The steps are complete!
Part 2: Update! CGDI MB adds FBS4 mileage programming via OBD
Nice features:

1. via OBD
2. Without can filter
3. Safe and stable
4. Without dismantling

Supported car models:
W205   2015-2017
W222   2015-2017
C190    2015-2017
C217    2015-2017
C253    2015-2017
X253    2015-2017
W447   2015-2017


Obviously, if you don’t have CGDI MB programmer, the cheapest FBS4 mileage programming solution is Mercedes_OBD assistant cable.
Enjoy!
This article tech Supported by China OBD2,