US$620 FoxFlash Master Version V1.4.2 Firmware version FW:D087 Super Strong ECU TCU Clone Chip Tuning Tool

FoxFlash Master Version Super Strong ECU TCU Clone and Chip Tuning Tool Free Update Support VR Reading and Auto Checksum

FoxFlash is a powerful solution developed for professional chiptuners, calibration engineers and control unit (ECU and TCU) repair shops. foxFlash includes multi-method control unit programming for tuning ability,this tool from tuner design ,so you can get many of them support. Since the FoxFlash is so much more than just an ECU programming tool, it simply can't be compared to any traditional flash tool. Despite other tools how good, this is being good tools for read/write operations, we supply many important features, both on the developer side as in daily use. That is why we recommend FoxFlash.

FoxFlash Master Version Highlights:

1. Master Version, Full protocols open

2. VR read online work (some ecu need use our VR system, tool auto connect to ousr server donload file)

3. ECU can be restore to original if your ecu was damage or meet some bad tuning , use our tool can restore to original

4. Free Update Online, No Subscription, No Annual Fee, Two Years Warranty. Latest Update Detail Check Here.

5. Tool can online work (some of ecu and functions can offline)

6. Auto checksum

7. Excellent Online Technical Support

8. Help desk and tuner account

9. ECU and TCU connect wires with pdf
10. Support MEDC17 free clone service (most of others tool need patch the files after read out ,but ours is free)
11. Software can be download on official website: https://www.dfb-technology.com/
12. With the Latest firmware and updates. Use better quality BOM and PCB. More stable, full proof, and reliable.
13. FoxFlash ECU TCU Car List, or check driver list on dfb-technology, it is much easier to search than pdf
14. Language: Italian, English, Dutch, French, Spanish, Polish, Portuguese, Romanian, Czech, Turkish
15. Please Check the FoxFlash Installation Instruction
16. New Arrival OTB 1.0 Expansion Adapter is suitable for foxFlash extended application engine and transmission computers, and is also suitable for ACM and DCM computer modules.

FoxFlash Operation Modes:

1. OBD mode: (read the data from Diagnostic port ,you need remove the ecu or tcu from car or open the ecu box , just read everything from car, we also support obd vr read, we supply original file from our server, you can direct obd vr read it )

2. BENCH mode: we also call it service mode, you can use this mode clone or backup all ecu data, read the internal flash and external flash and eeprom data, so you can save a lot of money for clone ecu and tcu , you also can clone tcu and chiptuning with this mode.

3. Jtag mode: open the ecu , and wire it or use ours adapter connect ecu ways,some of denso ecu always need use this mode for read and write .

4. Boot mode: open the ecu and always can backup everything , read the flash and eeprom , you can save some ecu cause your obd write failed, or some others reason cause the ecu dead.

5. Full system : you can read and write by pinout for most of ecu and tcu

6. BDM mode: some of the ecu need read and write in bdm mode ,open the ecu and use ours adapter connect it


FoxFlash Support types:

CAR
TRUCK
MOTORBIKE
TRACTOR
BOAT
Additional TCU package available for Automatic Transmissions.

FoxFlash Compatible Operating Systems:

Windows 7
Windows 8/8.1
Windows 10
Windows 11

Recommended minimum requirements:
CPU > 2.5 GHz (Intel i5, i7)
RAM > 4GB
64 bits

FoxFlash Software Display:











FoxFlash Function List:

ECU clone

TCU clone

Chiptuning

Stage1-stage4

Vmax off

Adblue and SCR off

DPF OFF

Flaps OFF

popbangs

gearbox data to adjust LC

sport display

immo off

dpf off

dtc off

GPF/OPF Removal

DPF Removal

EGR Removal

DTC Removal

ADBlue Removal

HOT Start Fix

IMMO Removal

Readiness Calibration

Flaps / Swirl Removal

TVA Removal

Sport Displays Calibration

Cold Start Noise Reduction

Kickdown Deactivation

StartStop Disable

MAF Removal

Speed Limiter Removal

Torque Monitoring Disable

Burbles Activation

Popcorn Activation

EVAP Removal

Exhaust Flap Removal

SAP Removal

AGS Removal

BMS/BPCM

Lambda/O2 Removal

Launch Control

OBD Reading Protection

Boost Sensor Calibration

LC, AL and NLS for MED9.1

Checksum Fix

vmax, swirl off

restoring ECU or TCU factory setting service

VIN fix (EEPROM support checksum , so you can easy change VIN then write back )

Support Winols damaos

As we all know, winols damaos and A2L is very expensive ,we supply these to ours customer for free, so you can get it for chitpuning, dtc off, and so on.

Supported Control Units
We believe a control units list can be considered as a more safe approach to correctly target the overall tuning procedure due to the fact that a lot of brands offer identical car models & versions that share different Control Unit types.

Please note that foxFlash can help you select the right protocol with its auto-detection feature when identifying on most control units.

Support Vehicle Types:

AUTO
CAMION
TRATTORI
MOTO
MARINE
BIKE
CAMBI AUTOMATICI

Multiple connection possibilities:
EXAMPLES OF CONNECTION IN FULL SYSTEM BOSCH / DELCO / DELPHI / DENSO / MARELLI / SIEMENS / CONTINENTAL / TEMIC



BENCH CONNECTION


BDM CONNECTION


JTAG CONNECTION


BOOT MODE CONNECTION


FoxFlash Update Information:

firmware version FW:D087:
update contents：
1: Update firmware response speed
2: Rewrite can and kline working speed to improve reading and writing speed
2024-11-28 01:58:10 sofware version 1.4.2 firmware version FW:D087
2024-07-05 16:40:10 sofware version 1.4.2 firmware version FW:D086
2024-05-05 12:31:11 sofware version 1.4.t firmware version FW:D08A
2024-03-02 15:28:16 sofware version 1.4.b firmware version FW:D08B
2024-02-05 18:26:16 sofware version 1.4.d firmware version FW:D08D
2024-01-29 20:57:24 sofware version 1.4.1 firmware version FW:D085
2024-01-02 22:38:06 sofware version 1.4.0 firmware version FW:D084
2023-12-26 13:06:16 sofware version 1.3.9 firmware version FW:D083
2023-12-12 17:31:26 sofware version 1.3.8 firmware version FW:D082
2023-12-06 12:31:31 sofware version 1.3.7 firmware version FW:D081
2023-09-25 08:44:55 sofware version 1.3.6 firmware version FW:D080
2023-05-23 22:50:20 sofware version 1.3.5 firmware version FW:D079
2023-03-03 10:51:28 sofware version 1.3.4 firmware version FW:D078
2023-02-25 14:34:25 sofware version 1.3.t firmware version FW:D077
2023-02-25 14:34:25 sofware version 1.3.3 firmware version FW:D076
2023-01-20 17:11:55 sofware version 1.3.2 firmware version FW:D075
2023-01-03 20:11:17 sofware version 1.3.1 firmware version FW:D074
2022-11-02 22:18:12 sofware version 1.3.0 firmware version FW:D073
2022-10-22 22:18:12 sofware version 1.2.9 firmware version FW:D072
December 26, 2023

foxFlash 1.3.9 Update:
OBD VR file update:
MED17.5.25 DCM6.2A DCM6.2V DCM6.2C
PCR2.1 SIMOS18.1 EDC17C74

foxFlash Manager Update:
FW update to D086
Notifications add

Checksum fix:
Marelli 9DF
Marelli MJD602.M1 - 603.S3
Bosch EDC17CP44

September 25, 2023
Special customized version foxFlash Manager 1.3.6 verison
The foxFlash team is proud to announce the 1.3.6 management software update, through which we will
1: Improve all VR databases.
2: Personal equipment customization.
3: Customize your brand tuning logo into the tool software.
4: Special personal beta version customization and testing.
5: Private tool VR database, exclusive VR model database.
6:Special personal VR data needs to be opened on the official website and contact us through the online chat tool to assist you in updating the individual VR file database.
Update method: Open foxFlash Manager software and it will automatically push the update. During this period, keep the USB connection of the device until the download is completed and reinstalled, you will see a new function.

September 14, 2023

Update for checksum fix for mcu TC1766 TC1793 TC1797 TC1724F TC1767

foxFlash is now able to perform the following operations:
software caculate checksum
On the following ECU reference:
Audi Bosch MED17.5 TC1766
Audi Bosch MED17.5.5 TC1766
Audi Bosch MED17.5.20 TC1766
Audi Temic VL381F TC1766
BMW Bosch EDC17C76 TC1793
Honda Bosch EDC17CP50 TC1797
Hyundai Bosch ME17.9.21.1 TC1724F
Jaguar Bosch MED17.9.7 TC1797
Kia Bosch ME17.9.21.1 TC1724F
Land Rover Bosch MED17.9.7 TC1797
Mercedes Bosch EDC17CP01 TC1796
Mercedes Bosch MED17.7.7 TC1793
Mercedes Bosch MED17.7.7 TC1797
Renault Bosch EDC17CP58 TC1767
Seat Bosch MED17.5 TC1766
Seat Bosch MED17.5.5 TC1766
Seat Bosch MED17.5.20 TC1766
Skoda Bosch MED17.5 TC1766
Skoda Bosch MED17.5 TC1766
Skoda Bosch MED17.5.5 TC1766
Skoda Bosch MED17.5.20 TC1766
Toyota Bosch EDC17C60 TC1793
Volkswagen (VW) Bosch ME17.5.6 TC1766
Volkswagen (VW) Bosch MED17.5 TC1766
Volkswagen (VW) Bosch MED17.5.5 TC1766
Volkswagen (VW) Bosch MED17.5.20 TC1766

September 06, 2023 update

BMW MINI BENCH BOOT READ&WRITE
BMW Install Bosch MEVD17.2.7 Bench read/write
foxFlash is now able to perform the following operations:

Bench Read
Bench Write
Boot Read
Boot Write

On the following ECU reference:

Bosch MEVD17.2.7
BMW Bosch MEVD17.2.7 BENCH BOOT
Citroen Bosch MEVD17.2.7 BENCH BOOT
Mini Bosch MEVD17.2.7 BENCH BOOT
Peugeot Bosch MEVD17.2.7 BENCH BOOT

Update method: Click the download button in foxFlash manager till all file donwloading is completed.

May 23, 2023 update

Bench/Boot protocol for Isuzu EDC17C83.
May can't get any better as we release a new exclusive protocol today! In this update, you'll find the BENCH protocol for Isuzu EDC17C83.

Supported Control Units & Vehicles
ECU:
Bosch EDC17C83 TC1793

Supported Vehicles:

Isuzu Dmax 2017-2022 1.9D 164cv
Isuzu Dmax Rodeo 2017-2022 1.9D 164cv
Isuzu M21 2017-2022 1.9D 123cv

BENCH read is real.
R/W time: ~6 minutes at first programming, then ~ 30s.

ATTENTION: Some of the latest vehicles might have a secure gateway.

Update method: Run the foxFlash Manager software, and click the download button till all is done.

Mar.14, 2023

FoxFlash is now able to perform the following operations:

Boot Read

Boot Write

On the following ECU reference:

Continental GPEC2 GPEC3 GPEC4LM GPEC2A

Chrysler 200 Continental GPEC3 BOOT

Chrysler 300 mk2 Continental GPEC2A BOOT

Chrysler Aspen Continental GPEC2A BOOT

Chrysler Grand VojagerContinental GPEC2A BOOT

Chrysler Town & CountryContinental GPEC2A BOOT

Dodge Avenger Continental GPEC2A BOOT

Dodge ChallengerContinental GPEC2A BOOT

Dodge Charger Continental GPEC2A BOOT

Dodge Dart Continental GPEC3 BOOT

Dodge Durango Continental GPEC2A BOOT

Fiat Tipo Continental GPEC4LM BOOT

Fiat Toro Continental GPEC3 BOOT

Fiat Toro Continental GPEC4LM BOOT

Fiat 500X Continental GPEC3 BOOT

Fiat 500X Continental GPEC4LM BOOT

JeepCherokee Continental GPEC3 BOOT

JeepCherokee Continental GPEC4 BOOT

JeepCompass Continental GPEC3 BOOT

JeepCherokee Continental GPEC4LM BOOT

JeepGladiator Continental GPEC2A BOOT

JeepGran Commander Continental GPEC4 BOOT

JeepRenegadeContinental GPEC3 BOOT

JeepWrangler Continental GPEC4 BOOT

Update method: Run the foxFlash Manager software, and click the download button till all is done

Mar.3, 2023

FoxFlash ECU Tool Ducati Update: install Bosch ME17.9.21 can easy Read and Write now.

FoxFlash is now able to perform the following operations:

• Bench Read
• Bench Write
• Boot Read
• Boot Write

On the following ECU:

• Bosch ME17.9.21

Vehicles concerned:

• Ducati 1.198 150hp

Support BENCH and BOOT option

Update method: Run the foxFlash Manager software, and click the download button till all is done.

Feb.25, 2023

FoxFlash ECU Tool Update Protocols for Porsche PDK, Easy to read and write Porsche PDK gearbox now.

BOOT

Porsche 911.2 Siemens PDK4000

Porsche 918 Siemens PDK3000

Porsche 918 Siemens PDK4000

Porsche Boxster 718 Siemens PDK3000

Porsche Boxster 981 Siemens PDK4000

Porsche Carrera 991 Siemens PDK3000

Porsche Carrera 991 Siemens PDK4000

Porsche Cayman Siemens PDK4000

Porsche Macan Siemens PDK3000

Porsche Macan Siemens PDK4000

Porsche Panamera Siemens PDK3000

Porsche Panamera Siemens PDK4000

Reading & Writing Time

Read: 12 minutes and 36 seconds

Write: 6 minutes and 18 seconds

How to update FoxFlash ECU Tool with latest version?:

Run the foxFlash manager, click the donwload button till everything done. a

January 27, 2023

FoxFlash is now able to perform the Toyota Denso Gen1 (76F00xx) OBD read/write
FoxFlash is now able to perform the following operations:

• OBD Read
• OBD Write

On the following ECU reference:
Denso Gen1 (76F00xx)

• Hino 4.0 VVT-i 147ch
• Lexus/Toyota 2.5 205ch
• Lexus 200H (1.8 E-CVT) 99ch
• Lexus 220d 177ch
• Lexus 250 (GSE20) 200ch
• Lexus 300 (3.0 V6) 204ch
• Lexus 330 (3.3 V6) 230ch
• Lexus 350 (3.5i V6) 275/300ch
• Lexus 400h (3.3i V6) 272ch
• Lexus 430 290ch
• Lexus 450h (3.5i V6) 292/299ch
• Lexus 460h (4.6 V8) 247ch
• Lexus 600h (5.0 V8) 394ch
• Toyota 1.0 (1KR-DE) 64ch
• Toyota 1.3 VVT-i 87/100ch
• Toyota 1.6 VVT-i 132ch
• Toyota 1.8 VVT-i HSD/TS 99/129/133ch
• Toyota 2.0 (1AZFE) 145ch
• Toyota 2.0 D4-D 116/126ch
• Toyota 2.0 DOHC 16v 156ch
• Toyota 2.0i 150ch
• Toyota 2.2 D4-D 136/150/177ch
• Toyota 2.4 (2AZFE) 160ch
• Toyota 2.5 205ch
• Toyota 2.5 D4-D 101/125/144/150ch
• Toyota 2.7i 161/188ch
• Toyota 3.0 D4-D 172ch
• Toyota 3.5 (2GRFE) 270ch
• Toyota 3.5i V6 266ch
• Toyota 4.0 V6 239/249/260/273ch
• Toyota 4.3 VVT-i 300ch
• Toyota 4.5 D4-D 272ch
• Toyota 4.5 V8 D4-D 198ch
• Toyota 4.6i VVT-i D-45 314ch
• Toyota 4.7 V8 280/288ch
• Toyota 5.0 VVT-i 295ch
• Toyota 5.7i VVT-i D-45 286ch
• Lexus GS 300
• Lexus GS 350
• Lexus IS-F
• Toyota Prius
• Toyota RAV 4
• Toyota Sequoia
• Toyota Tacoma
• Toyota Tundra
• Toyota Verso
• Toyota Auris
• Toyota Auris
• Toyota Avensis
• Toyota Camry
• Toyota Corolla (Verso)
• Toyota Crown
• Toyota Dyna
• Toyota Estima
• Toyota FJ Cruiser
• Toyota Fortuner
• Toyota Hilux
• Toyota Land Cruiser
• Toyota Mark X
• Toyota Optimo

ECU UPDATE New Protocols for Bentley Skoda (BOSCH )

Today we added multiple protocols for Bentley, Skoda, Honda, Volvo, etc. More info on supported ECUs and cars can be found below.
SUPPORTED CONTROL UNITS & VEHICLES
BENCH /BOOT/OBD
BOSCH
BAIC Bosch ME17.8.8 TC1728: Senova x25 1.5 VTI (2016), Senova X35 1.5 VTI (2016) , BJ20 1.5 VTI (2016)(BOOT)
Honda Bosch ME17.9.55 TC1724: City/Jazz/BRIO/FIT 1.2L i-VTEC (2014)(BOOT)
Mahindra Bosch EDC17C53 TC1767: XUV500 2.2 CRD (2014)(BENCH BOOT)
Bentley Bosch MG1CS163 TC298: Continental GT W12 6.0 (2018)(BENCH)
Volvo Bosch EDC16C34 MPC562: V70/S80 1.6D (2010)(OBD BENCH JTAG)
Skoda Bosch MED17.1.27: Fabia 1.0 TSI (2017)(OBD BENCH BOOT)
Bentley Bosch MED17.1.62: Bentayga W12 6.0 (2016)(BENCH BOOT)

BMW MSV90 Protocols BOOT Mode

This time it is for BMW cars with Siemens MSV90 TC1796 ECU. More info on supported cars can be found below.
SUPPORTED CONTROL UNITS & VEHICLES
BOOT
SIEMENS
MSV90 TC1796
CARS:
BMW 5 Series F10 – 530i N53B30A/N52B30B
BMW 5 Series F11 – 530i N53B30A/N52B30B
BMW 7 Series F01 – 730Li N52B30A/N52B30B
BMW 7 Series F02 – 730Li N52B30A/N52B30B
BMW X3 Series F25 – 28i xDrive N52B30A/N52B30B

Delphi DCM6.2AP DCM6.2A DCM6.2C DCM6.2V

FoxFlash is now able to perform the following operations:

DCM6.2A/C/V
OBD Read
OBD Write
JTAG_BOOT

DCM6.2APJTAG_BOOTOn the following ECU reference:

Hyundai
Audi
Citroen
Fiat
Kia
MAN
Peugeot
VW
Toyota
Ssangyong

January 26, 2023

FoxFlash Can Support AUDI VW Group TCU DQ250C/E/F OBD virtual read/write-BENCH Read&Write
FoxFlash is now able to perform the following operations:
OBD Virtual Read
OBD Write
BENCH Read
BENCH Write
On the following TCUs:
Temic DQ250C
Temic DQ250E
Temic DQ250F
Vehicles concerned:
AUDI/SKODA/VAG 2.0 TSI/TFSI
AUDI/SKODA/VAG 2.0 TDI CR

January 20, 2023

– BENCH MODE BY PROCESSOR INFINEON TRICORE TC1782
With this update you will be able to fully read and write the following ECUs directly
From pinout without having to open them:
– VAG GROUP VW-AUDI-SEAT-SKODA: MED17.5.21, MED17.5.25
– FORD: MED17.0.7
– NISSAN: EDC17 C84
– RENAULT: ME17.9.20, EDC17 C84
– TOYOTA: MED17.9.52, EDC17 C47

January 16, 2023

EXTRACT PASSWORD FROM FILE

– NEW DRIVERS TO EXTRACT PASSWORDS FROM FILES

New utilities useful for extracting the password by loading a Tricore processor file.
As of now, the software will also save the tricore password locally for each Tricore processor reading.

FULL SYSTEM FOR TCU TEMIC 6T50 OPEL, CHEVROLET

– Complete reading and writing of Micro,
– Complete reading and writing of EEPROM,
– Cloning
– RIVERGIN function

FoxFlash Package Includes:

Hardware:

1pc x Master machine
1pc x Fox bench box
1pc x USB cable
1pc x Power adapter
1pc x Fox box store over 10 adpaters
1pc x Jtag and bdm cables
1pc x Pen
1pc x Notebook
1pc x Suitcase
1pc x Function cable for boot, bench, kline links .
1pc x Truck OBD cable
1pc x Car OBD cable
1pc x Paper box
1pc x Install guide

Software:

1pc x Main software
1pc x Technical Support
1pc x Login account for software and tools
1pc x PDF pacakges for connecting ecu and tcu
1pc x Join facebook group for support
1pc x Online chat support for use

Extra pacakge according to users request after the user get the tool.

1pc x Tuner account
1pc x Helpdesk
1pc x WinOLS damaos, A2L

Pictures of FoxFlash Master Version V1.4.2 Firmware version FW:D087 Super Strong ECU TCU Clone Chip Tuning Tool

FoxFlash Master Version V1.4.2 Firmware version FW:D087 Super Strong ECU TCU Clone Chip Tuning Tool, now only need {price}, this price is valid within 1 week, If you need to buy FoxFlash Master Version V1.4.2 Firmware version FW:D087 Super Strong ECU TCU Clone Chip Tuning Tool, go to https://www.chinaobd2.com/wholesale/foxflash-ecu-programmer-7842.html.